A Message from Our Founder

Some of you have asked questions about an activity called FIRST Global. FIRST Global is a worldwide, Olympic-style, robotic-competition event separate from, but complementary to, FIRST®. It was founded by Dean Kamen, and you can learn more about this from Dean here http://www.firstinspires.org/about/fg. 

Comments

Post a Comment

Popular posts from this blog

Sooner State volunteer works hard to provide positive experience to FTC Teams

Image
When the Samantha Module was introduced for the 2009 Get Over It! season, FTC organizers in Oklahoma were looking for someone to do technical support and clear up questions around the new WiFi system.  They reached out to Jeremy Weimer. "I participated in the BEST robotics program [in high school], which was very enjoyable and rewarding," said Jeremy, who now works at an engineering firm specializing in mechanical, electrical and power for new buildings. "When I heard about the FTC competition, I was quite curious and interested in what was involved." Jeremy Weimer Jeremy's first tournament, the state championship at Southwestern Oklahoma State University (SWOSU) where he's a student, was also the first time the Field Control System was used in Oklahoma.  He was tasked with setting it up and running it.  However, he had only gotten his hands on it two days prior to the tournament. "It was chaotic, to say the least," he said. Despite some delays due...
Read more

3D Printing for FIRST Teams (7 of 8)

Image
3D Printing for FIRST Teams Authors: Kari Karwedsky, PTC , and Colm Prendergast, Mentor for FIRST Robotics Competition Team 1965 3D Printing Work Flow The 3D Printing Work Flow that we use is composed of 7 steps.   Step 1: Design your part using PTC Creo. Step 2: Export Model from PTC Creo in .stl format. Step 3: Prepare Model and Generate g-code file (or equivalent) for the printer. Step 4: Prepare and Level the 3D Printer Build Plate. Step 5: Load printer filament. Step 6: Print Model. Step 7: Clean up printed model. In this blog post, we will look more closely at Steps 5 and 6. 3D Printing Step 5: Load printer filament. Loading the Printer Filament is the last step to be completed prior to printing. Most 3D printers use spools of filament that are un-rolled as the filament is consumed. In our case we use 1kg roles of PLA filament. For this project we will use a roll of MakerBot “True Red” PLA filament with a 1.75mm diameter.  MakerBot “True Red” PLA filament  PLA is a...
Read more

3D Printing for FIRST Teams (1 of 8)

Image
This is the first entry of an 8-part series. Each entry will be published Tuesday, so be sure to look each week for the next post! 3D Printing for FIRST Teams Authors: Kari Karwedsky, PTC , and Colm Prendergast, Mentor for FRC Team 1965 Many FIRST Tech Challenge and FIRST Robotics Competition teams now have access to a 3D printer thanks to the generous donations of suppliers, but now what do you do with it? To get started, it’s probably a good idea to just tinker with it making something like a pencil cup to get a feel for how the printer works. But after that, how do you decide what makes sense to print for your robot? In this blog series we’ll review a robot design (by FRC Team 1965) that has several components that were 3D printed. This robot was specifically built to test the capabilities of 3D printing techniques. We will then walk through the 3D printing workflow used. We will discuss guidelines for deciding which parts might be good parts to consider 3D printing for your...
Read more